# Nonlinear Modeling

JuMP has support for general smooth nonlinear (convex and nonconvex) optimization problems. JuMP is able to provide exact, sparse second-order derivatives to solvers. This information can improve solver accuracy and performance.

Nonlinear objectives and constraints are specified by using the `@NLobjective`

and `@NLconstraint`

macros. The familiar `sum()`

syntax is supported within these macros, as well as `prod()`

which analogously represents the product of the terms within. Note that the `@objective`

and `@constraint`

macros (and corresponding functions) do *not* currently support nonlinear expressions. However, a model can contain a mix of linear, quadratic, and nonlinear contraints or objective functions. Starting points may be provided by using the `start`

keyword argument to `@variable`

.

For example, we can solve the classical Rosenbrock problem (with a twist) as follows:

```
using Ipopt
model = Model(Ipopt.Optimizer)
@variable(model, x, start = 0.0)
@variable(model, y, start = 0.0)
@NLobjective(model, Min, (1 - x)^2 + 100 * (y - x^2)^2)
optimize!(model)
println("x = ", value(x), " y = ", value(y))
# adding a (linear) constraint
@constraint(model, x + y == 10)
optimize!(model)
println("x = ", value(x), " y = ", value(y))
```

See the JuMP examples directory for more examples (which include `mle.jl`

, `rosenbrock.jl`

, and `clnlbeam.jl`

).

The NLP solver tests contain additional examples.

## Syntax notes

The syntax accepted in nonlinear expressions is more restricted than the syntax for linear and quadratic expressions. We note some important points below.

- With the exception of the splatting syntax discussed below, all expressions must be simple scalar operations. You cannot use
`dot`

, matrix-vector products, vector slices, etc. Translate vector operations into explicit`sum()`

operations or use the`AffExpr`

plus auxiliary variable trick described below. - There is no operator overloading provided to build up nonlinear expressions. For example, if
`x`

is a JuMP variable, the code`3x`

will return an`AffExpr`

object that can be used inside of future expressions and linear constraints. However, the code`sin(x)`

is an error. All nonlinear expressions must be inside of macros. - User-defined Functions may be used within nonlinear expressions only after they are registered. For example, the follow code results in an error because
`register()`

must be called first to register`my_function`

.

```
model = Model()
my_function(a, b) = exp(a) * b
@variable(model, x)
@variable(model, y)
@NLobjective(model, Min, my_function(x, y))
# output
ERROR: Unrecognized function "my_function" used in nonlinear expression.
```

`AffExpr`

and`QuadExpr`

objects cannot currently be used inside nonlinear expressions. Instead, introduce auxiliary variables, e.g.:

```
my_expr = dot(c, x) + 3y # where x and y are variables
@variable(model, aux)
@constraint(model, aux == my_expr)
@NLobjective(model, Min, sin(aux))
```

- You can declare embeddable nonlinear expressions with
`@NLexpression`

. For example:

```
@NLexpression(model, my_expr[i = 1:n], sin(x[i]))
@NLconstraint(model, my_constr[i = 1:n], my_expr[i] <= 0.5)
```

- Anonymous syntax is supported in
`@NLexpression`

and`@NLconstraint`

:

```
my_expr = @NLexpression(model, [i = 1:n], sin(x[i]))
my_constr = @NLconstraint(model, [i = 1:n], my_expr[i] <= 0.5)
```

- The splatting operator
`...`

is recognized in a very restricted setting for expanding function arguments. The expression splatted can be*only*a symbol. More complex expressions are not recognized.

```
julia> model = Model();
julia> @variable(model, x[1:3]);
julia> @NLconstraint(model, *(x...) <= 1.0)
x[1] * x[2] * x[3] - 1.0 ≤ 0
julia> @NLconstraint(model, *((x / 2)...) <= 0.0)
ERROR: LoadError: Unexpected expression in (*)(x / 2...). JuMP supports splatting only symbols. For example, x... is ok, but (x + 1)..., [x; y]... and g(f(y)...) are not.
```

## Nonlinear Parameters

For nonlinear models only, JuMP offers a syntax for explicit "parameter" objects which can be used to modify a model in-place just by updating the value of the parameter. Nonlinear parameters are declared by using the `@NLparameter`

macro and may be indexed by arbitrary sets analogously to JuMP variables and expressions. The initial value of the parameter must be provided on the right-hand side of the `==`

sign. There is no anonymous syntax for creating parameters.

`JuMP.@NLparameter`

— Macro.`@NLparameter(model, param == value)`

Create and return a nonlinear parameter `param`

attached to the model `model`

with initial value set to `value`

. Nonlinear parameters may be used only in nonlinear expressions.

**Example**

```
model = Model()
@NLparameter(model, x == 10)
value(x)
# output
10.0
```

`@NLparameter(model, param_collection[...] == value_expr)`

Create and return a collection of nonlinear parameters `param_collection`

attached to the model `model`

with initial value set to `value_expr`

(may depend on index sets). Uses the same syntax for specifying index sets as `@variable`

.

**Example**

```
model = Model()
@NLparameter(model, y[i = 1:10] == 2 * i)
value(y[9])
# output
18.0
```

You may use `value`

and `set_value`

to query or update the value of a parameter.

`JuMP.value`

— Method.`value(p::NonlinearParameter)`

Return the current value stored in the nonlinear parameter `p`

.

**Example**

```
model = Model()
@NLparameter(model, p == 10)
value(p)
# output
10.0
```

`JuMP.set_value`

— Method.`set_value(p::NonlinearParameter, v::Number)`

Store the value `v`

in the nonlinear parameter `p`

.

**Example**

```
model = Model()
@NLparameter(model, p == 0)
set_value(p, 5)
value(p)
# output
5.0
```

Nonlinear parameters can be used *within nonlinear expressions* only:

```
@NLparameter(model, x == 10)
@variable(model, z)
@objective(model, Max, x * z) # Error: x is a nonlinear parameter.
@NLobjective(model, Max, x * z) # Ok.
@expression(model, my_expr, x * z^2) # Error: x is a nonlinear parameter.
@NLexpression(model, my_nl_expr, x * z^2) # Ok.
```

Nonlinear parameters are useful when solving nonlinear models in a sequence:

```
using Ipopt
model = Model(Ipopt.Optimizer)
@variable(model, z)
@NLparameter(model, x == 1.0)
@NLobjective(model, Min, (z - x)^2)
optimize!(model)
value(z) # Equals 1.0.
# Now, update the value of x to solve a different problem.
set_value(x, 5.0)
optimize!(model)
value(z) # Equals 5.0
```

Using nonlinear parameters can be faster than creating a new model from scratch with updated data because JuMP is able to avoid repeating a number of steps in processing the model before handing it off to the solver.

## User-defined Functions

JuMP's library of recognized univariate functions is derived from the Calculus.jl package. If you encounter a standard special function not currently supported by JuMP, consider contributing to the list of derivative rules there. In addition to this built-in list of functions, it is possible to register custom (*user-defined*) nonlinear functions to use within nonlinear expressions. JuMP does not support black-box optimization, so all user-defined functions must provide derivatives in some form. Fortunately, JuMP supports **automatic differentiation of user-defined functions**, a feature to our knowledge not available in any comparable modeling systems.

Automatic differentiation is *not* finite differencing. JuMP's automatically computed derivatives are not subject to approximation error.

JuMP uses ForwardDiff.jl to perform automatic differentiation; see the ForwardDiff.jl documentation for a description of how to write a function suitable for automatic differentiation.

If you see method errors with `ForwardDiff.Duals`

, see the guidelines at ForwardDiff.jl. The most common error is that your user-defined function is not generic with respect to the number type, i.e., don't assume that the input to the function is `Float64`

.

```
f(x::Float64) = 2 * x # This will not work.
f(x::Real) = 2 * x # This is good.
f(x) = 2 * x # This is also good.
```

To register a user-defined function with derivatives computed by automatic differentiation, use the `register`

method as in the following example:

```
my_square(x) = x^2
my_f(x,y) = (x - 1)^2 + (y - 2)^2
model = Model()
register(model, :my_f, 2, my_f, autodiff=true)
register(model, :my_square, 1, my_square, autodiff=true)
@variable(model, x[1:2] >= 0.5)
@NLobjective(model, Min, my_f(x[1], my_square(x[2])))
```

The above code creates a JuMP model with the objective function `(x[1] - 1)^2 + (x[2]^2 - 2)^2`

. The first argument to `register`

is the model for which the functions are registered. The second argument is a Julia symbol object which serves as the name of the user-defined function in JuMP expressions; the JuMP name need not be the same as the name of the corresponding Julia method. The third argument specifies how many arguments the function takes. The fourth argument is the name of the Julia method which computes the function, and `autodiff=true`

instructs JuMP to compute exact gradients automatically.

Forward-mode automatic differentiation as implemented by ForwardDiff.jl has a computational cost that scales linearly with the number of input dimensions. As such, it is not the most efficient way to compute gradients of user-defined functions if the number of input arguments is large. In this case, users may want to provide their own routines for evaluating gradients. The more general syntax for `register`

which accepts user-provided derivative evaluation routines is:

```
JuMP.register(model::Model, s::Symbol, dimension::Integer, f::Function,
∇f::Function, ∇²f::Function)
```

The input differs between functions which take a single input argument and functions which take more than one. For univariate functions, the derivative evaluation routines should return a number which represents the first and second-order derivatives respectively. For multivariate functions, the derivative evaluation routines will be passed a gradient vector which they must explicitly fill. Second-order derivatives of multivariate functions are not currently supported; this argument should be omitted. The following example sets up the same optimization problem as before, but now we explicitly provide evaluation routines for the user-defined functions:

```
my_square(x) = x^2
my_square_prime(x) = 2x
my_square_prime_prime(x) = 2
my_f(x, y) = (x - 1)^2 + (y - 2)^2
function ∇f(g, x, y)
g[1] = 2 * (x - 1)
g[2] = 2 * (y - 2)
end
model = Model()
register(model, :my_f, 2, my_f, ∇f)
register(model, :my_square, 1, my_square, my_square_prime,
my_square_prime_prime)
@variable(model, x[1:2] >= 0.5)
@NLobjective(model, Min, my_f(x[1], my_square(x[2])))
```

Once registered, user-defined functions can also be used in constraints. For example:

`@NLconstraint(model, my_square(x[1]) <= 2.0)`

### User-defined functions with vector inputs

User-defined functions which take vectors as input arguments (e.g. `f(x::Vector)`

) are *not* supported. Instead, use Julia's splatting syntax to create a function with scalar arguments. For example, instead of

`f(x::Vector) = sum(x[i]^i for i in 1:length(x))`

define:

`f(x...) = sum(x[i]^i for i in 1:length(x))`

This function `f`

can be used in a JuMP model as follows:

```
model = Model()
@variable(model, x[1:5] >= 0)
f(x...) = sum(x[i]^i for i in 1:length(x))
register(model, :f, 5, f; autodiff = true)
@NLobjective(model, Min, f(x...))
```

## Factors affecting solution time

The execution time when solving a nonlinear programming problem can be divided into two parts, the time spent in the optimization algorithm (the solver) and the time spent evaluating the nonlinear functions and corresponding derivatives. Ipopt explicitly displays these two timings in its output, for example:

```
Total CPU secs in IPOPT (w/o function evaluations) = 7.412
Total CPU secs in NLP function evaluations = 2.083
```

For Ipopt in particular, one can improve the performance by installing advanced sparse linear algebra packages, see Installation Guide. For other solvers, see their respective documentation for performance tips.

The function evaluation time, on the other hand, is the responsibility of the modeling language. JuMP computes derivatives by using reverse-mode automatic differentiation with graph coloring methods for exploiting sparsity of the Hessian matrix [1]. As a conservative bound, JuMP's performance here currently may be expected to be within a factor of 5 of AMPL's.

## Querying derivatives from a JuMP model

For some advanced use cases, one may want to directly query the derivatives of a JuMP model instead of handing the problem off to a solver. Internally, JuMP implements the `AbstractNLPEvaluator`

interface from MathOptInterface. To obtain an NLP evaluator object from a JuMP model, use `JuMP.NLPEvaluator`

. `JuMP.index`

returns the `MOI.VariableIndex`

corresponding to a JuMP variable. `MOI.VariableIndex`

itself is a type-safe wrapper for `Int64`

(stored in the `value`

field.)

For example:

```
raw_index(v::MOI.VariableIndex) = v.value
model = Model()
@variable(model, x)
@variable(model, y)
@NLobjective(model, Min, sin(x) + sin(y))
values = zeros(2)
x_index = raw_index(JuMP.index(x))
y_index = raw_index(JuMP.index(y))
values[x_index] = 2.0
values[y_index] = 3.0
d = NLPEvaluator(model)
MOI.initialize(d, [:Grad])
MOI.eval_objective(d, values) # == sin(2.0) + sin(3.0)
# output
1.0504174348855488
```

```
∇f = zeros(2)
MOI.eval_objective_gradient(d, ∇f, values)
(∇f[x_index], ∇f[y_index]) # == (cos(2.0), cos(3.0))
# output
(-0.4161468365471424, -0.9899924966004454)
```

Only nonlinear constraints (those added with `@NLconstraint`

), and nonlinear objectives (added with `@NLobjective`

) exist in the scope of the `NLPEvaluator`

. The `NLPEvaluator`

*does not evaluate derivatives of linear or quadratic constraints or objectives*. The `index`

method applied to a nonlinear constraint reference object returns its index as a `NonlinearConstraintIndex`

. The `value`

field of `NonlinearConstraintIndex`

stores the raw integer index. For example:

```
julia> model = Model();
julia> @variable(model, x);
julia> @NLconstraint(model, cons1, sin(x) <= 1);
julia> @NLconstraint(model, cons2, x + 5 == 10);
julia> typeof(cons1)
ConstraintRef{Model,NonlinearConstraintIndex,ScalarShape}
julia> index(cons1)
NonlinearConstraintIndex(1)
julia> index(cons2)
NonlinearConstraintIndex(2)
```

Note that for one-sided nonlinear constraints, JuMP subtracts any values on the right-hand side when computing expressions. In other words, one-sided nonlinear constraints are always transformed to have a right-hand side of zero.

This method of querying derivatives directly from a JuMP model is convenient for interacting with the model in a structured way, e.g., for accessing derivatives of specific variables. For example, in statistical maximum likelihood estimation problems, one is often interested in the Hessian matrix at the optimal solution, which can be queried using the `NLPEvaluator`

.

## Raw expression input

In addition to the `@NLobjective`

and `@NLconstraint`

macros, it is also possible to provide Julia `Expr`

objects directly by using `set_NL_objective`

and `add_NL_constraint`

. This input form may be useful if the expressions are generated programmatically. JuMP variables should be spliced into the expression object. For example:

```
@variable(model, 1 <= x[i = 1:4] <= 5)
set_NL_objective(model, :Min, :($(x[1])*$(x[4])*($(x[1])+$(x[2])+$(x[3])) + $(x[3])))
add_NL_constraint(model, :($(x[1])*$(x[2])*$(x[3])*$(x[4]) >= 25))
# Equivalent form using traditional JuMP macros:
@NLobjective(model, Min, x[1] * x[4] * (x[1] + x[2] + x[3]) + x[3])
@NLconstraint(model, x[1] * x[2] * x[3] * x[4] >= 25)
```

See the Julia documentation for more examples and description of Julia expressions.

## Reference

`JuMP.@NLconstraint`

— Macro.`@NLconstraint(m::Model, expr)`

Add a constraint described by the nonlinear expression `expr`

. See also `@constraint`

. For example:

```
@NLconstraint(model, sin(x) <= 1)
@NLconstraint(model, [i = 1:3], sin(i * x) <= 1 / i)
```

`JuMP.@NLexpression`

— Macro.`@NLexpression(args...)`

Efficiently build a nonlinear expression which can then be inserted in other nonlinear constraints and the objective. See also [`@expression`

]. For example:

```
@NLexpression(model, my_expr, sin(x)^2 + cos(x^2))
@NLconstraint(model, my_expr + y >= 5)
@NLobjective(model, Min, my_expr)
```

Indexing over sets and anonymous expressions are also supported:

```
@NLexpression(m, my_expr_1[i=1:3], sin(i * x))
my_expr_2 = @NLexpression(m, log(1 + sum(exp(x[i])) for i in 1:2))
```

`JuMP.@NLobjective`

— Macro.`@NLobjective(model, sense, expression)`

Add a nonlinear objective to `model`

with optimization sense `sense`

. `sense`

must be `Max`

or `Min`

.

**Example**

`@NLobjective(model, Max, 2x + 1 + sin(x))`